Keypads & Rotary Controller
Primary Keypad
| Function | Description |
|---|---|
| Headlights | Toggles the headlights on/off. Red=On and Blank=Off. Note that hi and low beams are controlled on the steering wheel. |
| Cockpit Lights | Toggles the cockpit lights on/off. Red=On and Blank=Off. Note that hi and low beams are controlled on the steering wheel. |
| Parking Brake | Toggles the parking brake on/off. You must hold the button for X seconds to activate. Red=On and Blank=Off. NEED TO READ ECU MANUAL |
| Hazzard Lights | Toggles the hazzard lights on/off. BlinkingRed=On and Blank=Off. |
| Lanch | Toggles Launch mode. To initiate, the car must be at a full stop and the button must be held for 5 seconds. BlinkingRed=On and Blank=Off. |
| Exhaust Cutout | Toggles the exhaust cutouts. Red=On and Blank=Off. |
| Cool Down | Toggles cool down mode. To engage, the engine must be off. When activated, the cooling system pump and radiators will run for x minutes. Red=On and Blank=Off. |
| Raise Nose | Increases the nose height while pressed. You must listen to the motor and release when pitch changes (i.e., when the nose is fully raised). |
| Ignore Horn | Ignores the horn when engaged. The horn switches are integrated into the the left and right sides of the steering wheel rim and can be accidentially depressed while on the track. Red=On and Blank=Off. |
| Lower Nose | Decreases the nose height while pressed. You must listen to the motor and release when pitch changes (i.e., when the nose is fully lowered). |
| Engine Bay Lights | Toggles the engine bay lights on/off. Red=On and Blank=Off. |
Secondary Keypad
The door actuators are controlled via momentary switches which must be held until the door reaches the desired position. It would be nice to monitor the current to stop when a threshold is reached. MoTeC half bridges don’t do this, but ones from ECU Master do.
Rotary Controller
Need to discuss with RaceSpec.
Hidden Keypad
Used when the car is stationary.
| Function | Description |
|---|---|
| Prime Engine Oil | Runs the starter for TBD seconds while the rest of engine is inactive. The LEDs blink for the duration of the procedure, Can only be activated when the engine is off. |
| Run LP Fuel Pump | Runs the low-pressure fuel pump at TBD%. All LEDs blink while active. Can only be activated when the engine is off. |
| Run HP Fuel Pump | Run high-pressure fuel pump at TBD%. All LEDs blink while active. Can only be activated when the engine is off. |
| Run IC Pump | Run s the intercooler cooling pump at TBD%. All LEDs blink while active. Can only be activated when the engine is off. |