Maintenance - Bellcranks
Bellcrank — Main Pivot
The screw that fastens the push rod to the rocker must point towards upwards (i.e., the nyloc is on top of the rocker) to prevent binding on the 2” x 2” chassis rail.
ID | Qty. | Description | Compound | Torque(FOOT-POUNDS) | TOOL |
---|---|---|---|---|---|
A | 1 | Rocker (Aluminum & Steel) | - | - | - |
B | 1 | Rocker Support Arm (4130) | - | - | - |
C | 1 | Rocker Support Arm Cap (Onyx) | - | - | - |
D | 1 | 3/4" Shoulder x 4-1/2" Long x ??? Thread Shoulder Screw | - | - | 3/8" Hex Bit Socket |
E | 1 | 3/4" Washer (Grade 8) | - | - | - |
F | 2 | 3/4" ID x 5/16" Tall Cone Washer (Steel) | - | - | - |
G | 1 | 5/8" Washer (Grade 8) | - | - | - |
H | 1 | 5/8"-??? Nyloc (Grade 8) | - | ??? | ??? Socket |
I | 1 | ??? Screw (Grade 8) | - | - | ??? Socket |
J | 1 | ??? x 2-1/2" Screw (Grade 8) | - | - | ??? Socket |
K | 4 | 0.25" Cone Washer (Aluminum) | - | - | - |
L | 4 | ??? Washer (Grade 8) | - | - | - |
M | 2 | ??? Nyloc (Grade 8) | - | ??? | - |
Bellcrank — Sway Bar Connection
ID | Qty. | Description | Compound | Torque(FOOT-POUNDS) | TOOL |
---|---|---|---|---|---|
I | 1 | 1/2" Shoulder Screw, 4" Grip, ??? Thread [MODIFIED] | n/a | n/a | ??? Hex Bit Socket |
J | 1 | 1/2" Washer (Grade 8) | n/a | n/a | n/a |
K | 1 | ???" OD, ???" Tall Spacer (Aluminum) | n/a | n/a | n/a |
L | 2 | 3/8" x ???" Tall Misalignment Washer (Steel) | n/a | n/a | n/a |
M | 1 | 3/8"-16 Nyloc (Grade 8) | n/a | ??? | ??? |
Note that the last ???” of the grip of the shoulder screw was machined to 3/8”
Bellcrank — Link Connection
ID | Qty. | Description | Compound | Torque(FOOT-POUNDS) | TOOL |
---|---|---|---|---|---|
1 | 1/2"-??? x ???" Screw (Grade 8) | n/a | n/a | ??? Socket | |
2 | 1/2" Washer (Grade 8) | n/a | n/a | n/a | |
1 | 1/2"-??? Nyloc (Grade 8) | n/a | ??? | ??? Socket |