Maintenance — Sway Bars
Front Sway Bar
| ID | Qty. | Description | Tool |
|---|---|---|---|
| A | 1 | Front Sway Bar | n/a |
| B | 2 | Pillow Block Bottom (Aluminum) | n/a |
| C | 2 | Pillow Block Top (Aluminum) | n/a |
| 2 | Pillow Block Spacer (Aluminum) | n/a | |
| D | 4 | 5/16”-18 x 2-14” Socket Head Cap Screw (Zinc Plated) | 1/4” Hex Bit Socket |
| E | 4 | 5/16”-18 Nyloc (Grade 8) | 1/2” Wrench |
| F | 4 | 5/16” Washer (Grade 8) | n/a |
| G | 2 | Split Collar Half - Unthreaded (Stainless Steel | n/a |
| 2 | Split Collar Half - Threaded (Stainless SteelUn | n/a | |
| 4 | ??? Socket Head Cap Screw | 3/16” Hex Wrench |
The notches in the spacer face the collars to prevent them from binding. The collars are located???
Front Sway Bar Drop Link & Bracket
1x 3/8”-24 Rod End x 2” Long Drop Link
1x 3/8”-16 x 1-3/4” Hex Screw (Grade 8)
2x 3/8” Washer( Grade 8)
2x 3/8” x 0.18” Thick Misalignment Washer (Steel)
BLADE
3/8”-24 Nyloc (Grade 8)
Sway Bar Actuator Assemblies
| ID | Qty. | Description | Tool |
|---|---|---|---|
| A | 1 | Large Bracket Assembly (Stainless Steel & 3D Printed) | n/a |
| B | 1 | Small Bracket Assembly (Stainless Steel & 3D Printed) | n/a |
| C | 2 | 1/2" ID Split Collar (Stainless Steel) | n/a |
| D | 4 | ??? Screw (Stainless Steel) | Hex Key |
| E | 1 | Push Rod Connector (Stainless Steel) | n/a |
| F | Spacer??? | n/a | |
| G | M10 x 1.5 mm x 25 mm Hex Drive Button Head Screw (Stainless Steel) | 6 mm Hex Drive Socket |